Buy Low Price From Here Now
Readmore
Technical Details
- Essential tool for secure anchoring of tents, canopies, patio & garden structures, landscape trim- Heavy-duty 10"L x 5/16" diameter steel spike, galvanized for corrosion resistance
- Tough PVC T-top features both hook and rope-stringing eyelet for anchoring versatility
- Milled point inserts easier in hard soil; large head for mallet driving
- Set of one dozen pegs; 2.5 lbs total weight
See more technical details
By Earl C. Larsen
Great price for long, sharp Steel tent stakes. These stakes are long and heavy enough to really hold your tent or pop-up canopy in place. Not Aluminum which has a tendency to bend but coated steel which should give you many years of service.
By Flo Smith (Houston, TX)
We have used these tent stakes for years, and we have to keep buying them because the green plastic heads break off. Maybe it is a design feature to assure repeat customers. In our experience, the heads always break when trying to remove the stake with a stake puller, especially in hard soil.
BUT! I think I have found a way to avoid (or at least minimize) removal breakage. Before our last camping trip, I tied a cord to the nail portion, and threaded the loose ends through the hole in the green head. I used a miller's or constrictor knot (or some adaptation of it), then just tied the loose ends together into a loop above the plastic head. When stake pulling time came, we slipped the puller (or the handle of the mallet) into the cord loop (rather than into the plastic head), and all the stakes came up VERY easily, without damaging a single stake head. This concept works because now the pressure of the pull is absorbed by the metal nail, and not by the brittle plastic, and the pull is now directed at the shaft of the nail, which is what you want to remove (at least that's my theory; I don't pretend to understand physics). And it worked!! The loop was not in the way during the hammering phase, and provided the easiest removal that we have ever experienced. This method was tested in the hard, rocky soil of the Texas Hill Country - a tent stake's nemesis, I assure you.
Wikipedia has excellent examples of the aforementioned knots.
So with a little after-market retrofitting (I can attach the loops while my DH drives to the campground), these inexpensive, dependable stakes are at last a bit more durable.
By JimB (St. Davids, PA USA)
I've only used these tent pegs (tent nails) on one camping trip, but they worked quite well. I used a rubber mallet and tent peg puller (separate purchase). These 10" pegs could be difficult to pull without a tent peg puller tool.
I also bought a small canvas duffel, about 12" long, to hold the peps. I lined/reinforced the inside of the duffel with cardboard to withstand the peg points. I also use the same duffel to carry the mallet and tent peg puller tool. When transporting these sharp-pointed pegs in close proximity to tent fabric and inflatable sleeping pads, the pegs need to be housed in some sort of protective case.
Images Product
Buy 12-Piece Heavy-Duty 10" Galvanized-Steel Tent Peg Stake Set Now
No comments:
Post a Comment